Need all opinions and guidance on this decision I can get please

sherron82

Active Member
Local time
10:47 PM
Joined
Nov 9, 2023
Messages
268
Location
Morristown TN
Ok I'm about a week I'm going to make a purchase but not sure which ones to get. Can everyone pitch in and help me decide... There going on a Kent bayside with avenger motor. I really want to make the right choice here ya know. Kinda need ones that isn't going to require much work. And 160 is my budget,no more. Thanks for all feedback on this cause I really need it...
 

Attachments

  • Screenshot_20240412-072626.png
    Screenshot_20240412-072626.png
    499.7 KB · Views: 25
  • Screenshot_20240412-072634.png
    Screenshot_20240412-072634.png
    503.7 KB · Views: 22
  • Screenshot_20240412-072750.png
    Screenshot_20240412-072750.png
    440.5 KB · Views: 22
  • Screenshot_20240412-072825.png
    Screenshot_20240412-072825.png
    370.4 KB · Views: 21
  • Screenshot_20240412-072918.png
    Screenshot_20240412-072918.png
    626.7 KB · Views: 17
  • Screenshot_20240412-073121.png
    Screenshot_20240412-073121.png
    549.8 KB · Views: 19
  • Screenshot_20240412-073200.png
    Screenshot_20240412-073200.png
    567.4 KB · Views: 21
Found this one too but it's only the rear. It does seem worth it though. They have a single speed version and a multi speed version. I guess I'd need the multi speed cause the Kent bayside is a 7 speed.
 

Attachments

  • Screenshot_20240412-084642.png
    Screenshot_20240412-084642.png
    236.7 KB · Views: 17
Mag wheels with more than 3 spokes are death traps because of sudden, catastrophic failure.

3 spokes are ok so long you don't run them low on air and don't hit potholes or curbs.

Those super heavy spoke wheels are laced wrong and are inherently weaker because of this.

The aluminum ones for $119 are quality, but @GW's Motorized has had some challenges lining up the chain.

The BBR is going to be the more plug and play, middle of the road option.
 
Well gw said the rims he got might work better on a multi speed bike, he said the sprocket sits a little too far out. The Kent bayside I have is a 7 speed so maybe just maybe???
 
Back
Top