Made myself a little pinch bolt.

[cloakedvillain]

I cut some 1/4" brass roundstock to size then drilled a pilot hole for the tap and a hole for the cable. Finished it off with a little filing and tapping the threads. I used an 8-32 brass screw.

 

[GW's Motorized]

brass is probably the easiest thing to make something like that with. nice work.

 

[michael whiteman]

I cut some 1/4" brass roundstock to size then drilled a pilot hole for the tap and a hole for the cable. Finished it off with a little filing and tapping the threads. I used an 8-32 brass screw.

Very cool! Looks just like the ones at ACE