Hey there starting my build and have some parts laying about an shift kit I just got, a 66 angle fire from gas bike stock, and a set of 24in rims I built for an e bike project that never happened the wheel set has a 9 speed 11-34 cogset and I have a sram derailer and a set of Clark's or something like that 160mm disk breaks, can anyone recommend a frameset preferably not a cruiser preferably steel.
MxCx
- Thread starter Jwestie15
- Start date
wheelbender6
Well-Known Member
Tensile steel mountain bike frames work well. I used a nice chromoly mountain bike frame once but the steering was too quick and the ride was too stiff. I like tensile steel frames for motorized bikes.
Jwestie15
Member
- Local time
- 5:17 PM
- Joined
- Jun 9, 2017
- Messages
- 55
http://m.ebay.com/itm/TSUNAMI-CR-MO...set-700C-Frame-Fork-Classic-Red-/272568614389
Pulled the trigger on this one should all mate up good as it has disk break acomidations in the size of my rotors and 1 1/8 steerer
Pulled the trigger on this one should all mate up good as it has disk break acomidations in the size of my rotors and 1 1/8 steerer
Jwestie15
Member
- Local time
- 5:17 PM
- Joined
- Jun 9, 2017
- Messages
- 55
wheels are in bontrager DH mtb rims 25mm wide, aw2 bontrager hybrid tires, presta valve tubes. still need to pick a bar riser im thinking ill get one of the suspension ones seeing as i have rigid forks
cut some rams horns into shorty flat bars today. starting to measure for control cables and fit the throttle ect
cut some rams horns into shorty flat bars today. starting to measure for control cables and fit the throttle ect
