Preamble to this - I have had a basic straight kit-build in the past decade, and an aborted build that was much higher grade, that had i lost interest in/evolved into the build being documented right now.. over a 5 year time-span.
I had stopped 'building' .. but i didn't stop monitoring/buying up parts to progress on another possible build. As such, in putting it all together when the project came back on the bench, i had minimum needed to buy, more a matter of pick and choose. In my frustration over my aborted build, i had built a higher-end eMTB - and some components of that, have also being able to filter down to this project. I have, in all truthfulness, already found my 'regular' ride in the Downhill eMTB. I am doing this project, for an occasional use neighborhood pavement-plonker.
In the meanwhile, the project had idled, as other projects jumped the project queue.. i did get a work bench into the garage, and organized parts so that i could find them, whatever project it might be awaiting... until several months ago being newly inspired, it hopped onto the workbench in this state... a collection of parts flying together in loose formation.
.
In addition to the Belt Drive pulley option - one of the last things i had picked up, was 3 or 4 different variations of the 36 tooth sprocket/rotor adapter combo, but for the life of me i couldn't make it work.. I'm going to call that, my own cognitive issue. When i got it on the bench, i was looking at my drive-train options again, i laid them out.. and got a bit of a brainwave on the Belt Drive Pulley. See, i was never really happy with it, in Theory.. it's got no shouldering for belt retention. If alignment or tension is off, you aren't going to have belt retention! I just so happened to have a few 203mm rotors sitting on the bench at the same time, and my mind's eye made a visual connection.
Let us start putting a couple of these things together..
Now, along with a 255mm rotor that i had from Bicycledesigners.com...
This is the renewed Impetus for my Project. I couldn't make it work with 203mm/36 tooth combo, but i'm making the principle work in a way i haven't seen elsewhere... This is all a creative experiment, at this point, using what i have accumulated, minimum additional to purchase. I've already done several donations to Bike Cooperatives, in cleaning the garage of spare parts.. .
I had stopped 'building' .. but i didn't stop monitoring/buying up parts to progress on another possible build. As such, in putting it all together when the project came back on the bench, i had minimum needed to buy, more a matter of pick and choose. In my frustration over my aborted build, i had built a higher-end eMTB - and some components of that, have also being able to filter down to this project. I have, in all truthfulness, already found my 'regular' ride in the Downhill eMTB. I am doing this project, for an occasional use neighborhood pavement-plonker.
In the meanwhile, the project had idled, as other projects jumped the project queue.. i did get a work bench into the garage, and organized parts so that i could find them, whatever project it might be awaiting... until several months ago being newly inspired, it hopped onto the workbench in this state... a collection of parts flying together in loose formation.
In addition to the Belt Drive pulley option - one of the last things i had picked up, was 3 or 4 different variations of the 36 tooth sprocket/rotor adapter combo, but for the life of me i couldn't make it work.. I'm going to call that, my own cognitive issue. When i got it on the bench, i was looking at my drive-train options again, i laid them out.. and got a bit of a brainwave on the Belt Drive Pulley. See, i was never really happy with it, in Theory.. it's got no shouldering for belt retention. If alignment or tension is off, you aren't going to have belt retention! I just so happened to have a few 203mm rotors sitting on the bench at the same time, and my mind's eye made a visual connection.
Let us start putting a couple of these things together..
Now, along with a 255mm rotor that i had from Bicycledesigners.com...
This is the renewed Impetus for my Project. I couldn't make it work with 203mm/36 tooth combo, but i'm making the principle work in a way i haven't seen elsewhere... This is all a creative experiment, at this point, using what i have accumulated, minimum additional to purchase. I've already done several donations to Bike Cooperatives, in cleaning the garage of spare parts.. .
Last edited: