i pulled the carb drain screw and it started then died

[motoredjosh]

or the gasket...

 

[motoredjosh]

the carb fuel line filter the carb gasket carb gasket the head gasket with copper seal the adjusted throttle cable cap the adjusted throttle handle my chain

 

[motoredjosh]

idle screw is at 11 half twists

 

[motoredjosh]

it's the carb gasket

 

[motoredjosh]

thats the only thing that makes sense

 

[Chainlube]

Your spark plug boot isn't on all the way. Look inside the boot to see if you need the spark plug cap or not. That looks like one of those boots where you have to remove the cap from the end of the plug. They just screw off.

 

[motoredjosh]

Your spark plug boot isn't on all the way. Look inside the boot to see if you need the spark plug cap or not. That looks like one of those boots where you have to remove the cap from the end of the plug. They just screw off.

ok I tried it and it's the same thing

 

[DAMIEN1307]

it's the carb gasket

I use the intake gaskets for the carby that are made for me by @mark20...They are superior to the cheap Chinese ones that come with the motor kit, I also use this gasket linked below for the eshaust gasket as it is also superior to the one you've got.

https://www.amazon.com/Dorman-47021-Oxygen-Sensor-Seal/dp/B000TYU1WE

 

[motoredjosh]

Your spark plug boot isn't on all the way. Look inside the boot to see if you need the spark plug cap or not. That looks like one of those boots where you have to remove the cap from the end of the plug. They just screw off.

it kicks over for like four seconds then stops and has negative effect to throttle it seems like

 

[motoredjosh]

I use the intake gaskets for the carby that are made for me by @mark20...They are superior to the cheap Chinese ones that come with the motor kit, I also use this gasket linked below for the eshaust gasket as it is also superiour to the one you've got.

https://www.amazon.com/Dorman-47021-Oxygen-Sensor-Seal/dp/B000TYU1WE

i have permatex ultra copper, that'll work?