My John Deere Project!
Finally done, I guess I am one of the few to try out these new 49cc 4-stroke kits. I made many modifications, and some additions, and thought the crew would like my comments.
The engine runs nice. No complaints there. I added some motor mounts by slicing off the rubber ends of some tire valves, because everyone complained about vibration. They work well.
I ditched the chain tensioner wheel but kept the bracket and added a spring loaded glide wheel made for a single speed bike. This really helps, as the spring jumps back and forth under accel/deaccelleration.
The decals came off a child's Peg-Prego JD pedal tractor. A 6v battery runs just the lights (rear turn signals, brake light and front lights) I added a solar charger to keep it charged instead of recharging it all the time from an AC outlet. With the Georgia sun, it stays charged.
I added a rear brake switch to the rear brake, so the rear light lights up when I hit the brake handle. I added 2 bulbs between the turn signal bulbs for this. I fashioned a few parts to run a double set of rear side-pull brakes, with a dual pull brake handle just for the rear. I don't think too many people have tried that, but I figured I needed more braking power.
The Dash of 3 switches controls the main power, lights, and power to the rear. One lights up a Green LED. I have a horn switch but have yet to find a good 6v horn yet. A mini compass fits in the middle stem. I even added a cordless radar detector! Everything on the bike is either Black, Yellow, or Green.
I am just using it around the island where I live, the speed limits are 25-35 so it is perfect. Added a double kick-stand, the kind from Switzerland. NICE Product! Bought a yellow JD embossed seat from Nirve for $25 to match. Did add some lithium grease to the transmission to quiet it down some. First I painted the engine and exhaust high-temp black (not the carb). After 100 miles, it has come off the exhaust tube. Added yellow reflective tape swatches. Still need a longer analog speedometer cable, as I added shocks which raised the bike up quite a bit, but the digital one works well for now.
Hope you like it, Lord knows the kids, both big and small, sure like it around here! I have had a blast riding it around!
Finally done, I guess I am one of the few to try out these new 49cc 4-stroke kits. I made many modifications, and some additions, and thought the crew would like my comments.
The engine runs nice. No complaints there. I added some motor mounts by slicing off the rubber ends of some tire valves, because everyone complained about vibration. They work well.
I ditched the chain tensioner wheel but kept the bracket and added a spring loaded glide wheel made for a single speed bike. This really helps, as the spring jumps back and forth under accel/deaccelleration.
The decals came off a child's Peg-Prego JD pedal tractor. A 6v battery runs just the lights (rear turn signals, brake light and front lights) I added a solar charger to keep it charged instead of recharging it all the time from an AC outlet. With the Georgia sun, it stays charged.
I added a rear brake switch to the rear brake, so the rear light lights up when I hit the brake handle. I added 2 bulbs between the turn signal bulbs for this. I fashioned a few parts to run a double set of rear side-pull brakes, with a dual pull brake handle just for the rear. I don't think too many people have tried that, but I figured I needed more braking power.
The Dash of 3 switches controls the main power, lights, and power to the rear. One lights up a Green LED. I have a horn switch but have yet to find a good 6v horn yet. A mini compass fits in the middle stem. I even added a cordless radar detector! Everything on the bike is either Black, Yellow, or Green.
I am just using it around the island where I live, the speed limits are 25-35 so it is perfect. Added a double kick-stand, the kind from Switzerland. NICE Product! Bought a yellow JD embossed seat from Nirve for $25 to match. Did add some lithium grease to the transmission to quiet it down some. First I painted the engine and exhaust high-temp black (not the carb). After 100 miles, it has come off the exhaust tube. Added yellow reflective tape swatches. Still need a longer analog speedometer cable, as I added shocks which raised the bike up quite a bit, but the digital one works well for now.
Hope you like it, Lord knows the kids, both big and small, sure like it around here! I have had a blast riding it around!