srdavo
Well-Known Member
Edward is right. Here's a copy of the instructions I have....
1. How to Adjust Clutch if signs of slipping or squealing are encountered :
A) Disengage clutch by pulling handle bar clutch lever inward and lock into catch lock.
B) Remove right side engine clutch cover and remove small locking screw on center *Clutch Adjust Nut.
C) Pull clutch arm on left rear engine inward. Back off *Clutch Adjust Nut ¼ turn counterclockwise.
D) Release handlebar clutch lever and check for slight 1/16" free-play on engine clutch arm.
E) Readjust *Clutch Adjust Nut as required to get required 1/6" clutch arm free play.
F) Tighten *Clutch Adjust Nut on clutch plate clockwise until just snug.
G) Then re-install small locking screw in outer edge of *Clutch Adjust Nut .
H) Good idea to place a small gob of grease at gear mesh area. Use grease sparingly! Then replace cover.
I ) Squirt light grade oil down clutch cable sheathing to reduce friction and make for easy lever pull.
*Clutch Adjust Nut and Lock screw--- aka...gland nut
1. How to Adjust Clutch if signs of slipping or squealing are encountered :
A) Disengage clutch by pulling handle bar clutch lever inward and lock into catch lock.
B) Remove right side engine clutch cover and remove small locking screw on center *Clutch Adjust Nut.
C) Pull clutch arm on left rear engine inward. Back off *Clutch Adjust Nut ¼ turn counterclockwise.
D) Release handlebar clutch lever and check for slight 1/16" free-play on engine clutch arm.
E) Readjust *Clutch Adjust Nut as required to get required 1/6" clutch arm free play.
F) Tighten *Clutch Adjust Nut on clutch plate clockwise until just snug.
G) Then re-install small locking screw in outer edge of *Clutch Adjust Nut .
H) Good idea to place a small gob of grease at gear mesh area. Use grease sparingly! Then replace cover.
I ) Squirt light grade oil down clutch cable sheathing to reduce friction and make for easy lever pull.
*Clutch Adjust Nut and Lock screw--- aka...gland nut
Last edited by a moderator: