Mike Bailey
New Member
- Local time
- 9:50 AM
- Joined
- Jul 19, 2016
- Messages
- 29
Hi all. I finally got my 80/66cc engine installed on my 24in road master. So far its been a big job finding and making stuff work. The carb had to sit at a 45 degree. The muffler was hitting the pedal and needed bent slightly. The chain had to be shortened and the funky rear sprocket to me a while to figure out. After all that I go for the first start up and it will not start. I've checked for fuel and thats there because I have some coming from the muffler. Pulled the plug and there's no spark. I've checked for wiring diagrams and mine seems different from most.
Magneto has
Black/blue soldered(no white)
Cdi has black/blue
Kill switch is red and black
I was going to ground the magneto off the frame to see if that's the issue but I wasn't sure if I'd break something or short something. I'll get some pictures tomorrow. Thanks. Mike.
Magneto has
Black/blue soldered(no white)
Cdi has black/blue
Kill switch is red and black
I was going to ground the magneto off the frame to see if that's the issue but I wasn't sure if I'd break something or short something. I'll get some pictures tomorrow. Thanks. Mike.