Will'smotobikes19
Well-Known Member
While my 79cc motor is on the bench I think I will modify it. It already has a better plug so I'll probably get a bigger main jet, remove governor, make the exhaust into a straight pipe and was even thinking of taking the stock valve springs from the 212 hemi and putting them in the 79cc. Upon further inspection not only was my coil going but one of the rockers was way too loose. I think I will try to limit rpm with the throttle stop and maybe get a tachometer. I could try to drill the jet but I don't know what the stock size is or what it should be drilled to. I like how the motor looked on the Micargi with the same name- predator. Also mountain bike handlebars on a stretched beach cruiser aren't comfortable I found out. Any tips or info appreciated also what top speed would I be getting in the 40's? I couldn't get the clutch off so I bought a puller. The clutch is shot I think when you spin it it hangs up and it slipped before so might have to get another one.