Well the original intension was to get mainly a frame that could be cut up and have modified. I intended to get my hands on a motorcycle frame and have that modified but they were only selling for 200 - 300 at a junkyard so I figured I would save that for later down the road.
As for the spokes, I have intentions of adding a swing arm and or using a pit bike frame so I could use pit bike rims like so:
There was a massive amount of things I wanted to do.
I was going to go with a Zeda frame until I realized how poor they are built when the supplier came up with only this:
But once I realized how low end the cost is on production, I had no intentions of going with that method, yet people sell these frames in America for 500++. So that's a huge red X.
I'm honestly looking into a lot of upgrades as you said "Safety". But for now I think putt around 20 km/h is what I am going to do for now until I start doing special upgrades.
Even though I'm not short on the cash, it's just wise not to find something I keep dumping money into right away, So i'm just going to leave it be for right now.
I do intend to consider on buying either the pit bike frame or motorcycle frame and convert it over to a bicycle, then I will have something to always work off of that will be strong and interesting with a massive amount of modification space.
Yes! The speedo I obtained stops at 35 mph. So anything past it the speedo might break or just get close to the rim, and I don't want to go that fast on the bike right away and or plan to go that fast way anytime soon.
Trying my hardest to do that! I had considered using that plate and blacking out the "NO" and doing the 49cc as you said.
That's what I am trying to do, if all goes well I should have myself a pee wee herman bike that police will just laugh at..