Clutch difficulties

[misteright1_99]

Take the ball and rod out and grease them, also where the arm contacts the rod. Then where the clutch cable mount is under the carby, unscrew that and put some grease in there also, it might help.....

 

[will_start]

the squeeelll from my clutch (on take-off) comes from the gears, put some machine grease on
the gears and they will stop it. Also I found a post on glueing card-board on the inner
of the gears clutch plate, this stops resonance and the gears will quite down by at least 80% db.

I know I did this yesterday, find that post ^^^!!!